TAG Handy Purge 100 Plus Weld Purge Monitor
Portable, self-calibrating, self pumping digital oxygen monitor.
Measures oxygen levels down to 0.01% (100ppm)
High Purity Welding
Oxygen contamination is one of the most common reasons for substandard welds. Constant monitoring is necessary to ascertain oxygen has been evacuated to prevent oxidation, discolouration and coking. The enhanced 100 ppm resolution makes the Handy Purge 100 Plus perfectly suited for high purity welding.
TAG Handy Purge 100 Plus Weld Purge Monitor
Features and Advantages
- 0.01% Oxygen Resolution
- Automatic Self Calibration
- Internal Pump
- Data Logging Capability: Accumulates Up to 50 Data Points
- Data Output to Computer for Recording History
- Audiovisual Alarm
- Rechargeable 9V Battery
- One Year Warranty on Unit and Sensor
- Illuminated Display
- Designed for Universal Voltage
- Programmable in Multiple Gas Compositions
- Programmable in Multiple Languages
Audiovisual Alarm
Oxygen contamination is one of the most common reasons for substandard welds.
Eliminate guesswork by setting the audiovisual alarm to desired O2 PPM value.
The unit will produce an intermittent beep sound simultaneously as a green light flashes. The operator
is alerted and can continue evacuating oxygen, reset the alarm or commence welding.
Handy Purge 100 Plus Weld Purge Monitor
| Measurement Range: | 0.01-21.0% Oxygen concentration by volume | |
| Calibration: | 20.9% (Oxygen concentration in air) | |
| Calibration Gas: | Ambient Air | |
| Display Resolution: | 0.01-24.99% (2 decimal places LCD) | |
| Accuracy: | @ 99.995% Ar +/- 0.01% | |
| Response Time: | T90<15 seconds | |
| Warm Up Time: | Negligible | |
| Humidity: | 0-95% non-condensing | |
| Operating Temperature: | 32°-122°F (0°-50°C) | |
| Storage Temperature: | 37.4°-68°F (3°-20°C) | |
| Sample Flow: | 1.0 LPM maximum | |
| Sample Pressure: | 10.0 PSI (pounds-force per square inch) maximum | |
| Power: | One 9V NiMH Cell Battery | |
| Battery Life: | Up to 2 hours when operating in continuous sampling mode. | |
| Sensor Type: | Electrochemical Oxygen Sensor | |
| Sensor Life: | 12 months | |
| Recommended Calibration Period: | Weekly, dependent upon use | |
| PC Connection: | USB Type B |
| PART NO. | DESCRIPTION | DIMENSIONS (MM) | WEIGHT (GRAMS) |
|---|---|---|---|
| HP100P | Handy Purge 100 Plus | 140 x 89 x 38mm | 454g |
| HP100S | Oxygen Sensor | 38 x 63.5mm | 68g |
| HP100F | Sponge Filter | 12.7 x 19.0mm | 1g |
| HP100L | Lead Pellets | 101.6 x 152.4mm | 450g |
Downloads
Links here
Pipe Purging Equipment
- Why Purge
- Purge Bag System
- Rapid Purge System
- Heat Resistant Purging System
- Double Seal System
- Gas Cylinders
- E-Z Zone Tape
- E-Z Purge
- Water Soluble Paper
- Handy Purge 100 Self Calibrating Weld Purge Monitor
- Handy Purge 100 Plus Weld Purge Monitor
- Handy Purge Pro 5 Weld Purge Monitor
- Pro Purge 1 Weld Purge Monitor
- Fiback Tape
- Solugap
- Liquifilm
- EZ Wipes
- Trailing Shields
Featured News
SEND US YOUR PICTURES AND RECEIVE A £50 DISCOUNT OFF
e-mail us some pictures of our equipment in use, and if we use them on the website, or in any of our literature we'll give you a £50 credit against your next order!!!
Featured News
OUT NOW!
THE NEW 'E-Z' FIT RED PIPE CLAMP!
The latest addition to TAG Pipe’s range - rapid fit up, pipe-welding alignment clamps, is the latest version of the ‘E-Z’ Fit Red. Boasting a range of 1" to 12" in just 3 clamps! The new ‘E-Z’ Fit Red can be used on stainless steel without any additional accessories, preventing contamination of the pipe during fit up.